高新技术企业 · 汽车深度养护品专业供应商

全国招商热线:13318861726

三元催化清洗剂

1. 有效清除三元催化器外表的积碳及残留物。

 2. 恢复三元催化器的净化功能,降低尾气排放。

 3. 提升燃油燃烧效率,提高冷车启动功能,降低油耗,恢复发动机动力。

 4. 延伸三元催化器的运用寿命,镌汰帮理归纳本钱。

  • 三元催化清洗剂
  • 三元催化清洗剂

优途三元催化高效清洗剂

品牌:UD优途

编制:进排气编制

产物编号:UD-01.265/325ml

企业标准:Q/YKJH 8

产物仅供4S店运用


产物特性:

1. 有效清除三元催化器外表的积碳及残留物。

 2. 恢复三元催化器的净化功能,降低尾气排放。

3. 提升燃油燃烧效率,提高冷车启动功能,降低油耗,恢复发动机动力。

 4. 延伸三元催化器的运用寿命,镌汰帮理归纳本钱。


运用方法:

1、启动发动机至正常工作温度,

2、用专用油门固定器将引擎转速固定正正在2500转

3、寻觅、拆开骨气门后的真空管(有真空吸力),靠近骨气门第一个管口最佳,

4、把产物瓶口打开结合正正在专用清洗竖立上(或倒入竖立铁罐中),并把竖立出液透明软管与汽车的真空管对接,

 5、打开竖立开关,将流量调整开关调到产物成滴入装状进入真空管为正确,清洗时间为25-30分钟最佳,

6、整瓶产物用完,除碳时间完成,拔出结合汽车真空管接头并恢复原状,

7、将油门固定器拆下,以每500转/10秒轻缓加油,逐渐加至3000转,以稍快速度浸复上述行为。

8、待进排气声顺畅时再排碳15分钟,除碳中及排碳时绝不可以浸踩油门,排碳后必须进行路试。


Product features:

 1. Effectively remove the carbon deposition and residue on the surface of the ternary catalytic converter.

2. Restore the purification function of the three-way catalytic converter and reduce the exhaust emission.

3. Improve fuel combustion efficiency, improve start-up performance of cold vehicle, reduce fuel consumption and restore engine power.

 4. Extend the service life of three-element catalytic converters and reduce the comprehensive maintenance cost.


Usage:

1. Start the engine to the normal operating temperature,

2. Fixed the engine speed at 2500 revolutions with special accelerator fixator

3. Look for and open the vacuum tube behind the throttle (with vacuum suction). It is best to be close to the first pipe opening of the throttle.

4. Open the product bottle mouth and connect it to the special cleaning equipment (or put it into the equipment tin), and connect the device's liquid outlet transparent hose to the vacuum tube of the car.

5. Turn on the device switch, and adjust the flow rate adjustment switch to the product to drip into the vacuum tube. The cleaning time is 25-30 minutes.

6. When the whole bottle of product is used up, the decarbonization time is completed, and the vacuum tube connector of the car is pulled out and restored to its original state.

 7. Remove the accelerator fixator and gently refuel every 500rpm / 10s, gradually add to 3000 RPM and repeat the above action at a slightly faster speed.

 8. When the inlet and exhaust sound is smooth, the carbon shall be discharged for another 15 minutes. In addition, the gas pedal shall not be pressed again when the carbon is removed and the road test shall be conducted after the carbon is discharged.


返回顶部

今日足彩单关分析_澳门永利总站送28_奥林匹克博彩游戏官网 真人发牌app_真人赌博10元可提现_通宝游戏官网app 亚投娱乐官方网站_2018最新电玩城_云顶4008app 电子游戏套利游戏_至尊宝游戏平台网站_澳门永利集团永久网址 博猫游戏怎么注册_h5蓝月贪玩手游官网_银河娱乐场网页游戏 太阳2138网站_bet366官网网址_双胜娱乐官方网下载 辉煌集团1147_在线娱乐场赌博注册_永信在线app下载 金沙线上赌上网站_葡京娱乐场网页游戏_360bet网络游戏